Super Premium (SP) Series
Our advanced PLA formulation is developed specifically to enhance your 3D printing experience.
Parts made with Super Premium Series filament have excellent 3D printing characteristics such as:
- Precise details
- Excellent adhesion to build plates
- Less curling or warping, and low odour
Eco-Friendly
Our PLA is derived from renewable plant sugars. Using this advanced process, carbon in the atmosphere contributing to global warming is transformed into sustainable and biodegradable 3D printing material.
This approach significantly reduces greenhouse gases when compared to oil-based plastics.
Spool Dimensions
Our spools are designed to fit many 3D printers including Makerbot® Replicator 2. They can also be used in standalone mode with a spool holder designed for that purpose.
Willy Benzing (verified owner) –
Good quality filament, first print was successful as were the rest. Running on my Robo 3D R1 Plus w/ heated bed at 225. No clogs or jams sor far.
Philip Chapa (verified owner) –
Good filament!
Federico Sidener (verified owner) –
I am very pleased with the quality of this filament. I purchased this ultimately due to price, but i am pleased with the results. I used this in a prusa I3 and am running it at 220°C. I will be buying more whenever i run out to see if it’s consistent.
Francis Yeats (verified owner) –
Never have I had a problem with air bubbles or moisture. Runs in my MendeMax 1.5 perfectly. I just wish they would offer larger spools…
Charlie Spade (verified owner) –
Never using a different company for filament again. Boots Industries is the gold standard for me.
Cory Oxford (verified owner) –
Just what I expected. It worked great.
Leena H (verified owner) –
It works great if you can get your printer in the 210-230 print range, but anything lower and the extruder stops.
Carol Fedrick (verified owner) –
Very nice product. Consistent. Have bought it more than once.
Armando Clemens (verified owner) –
Prints super clean. Only have one roll, so can’t comment on roll to roll consistency yet, but seems great.
Raymond Atterbury (verified owner) –
I bought this with my Felix 2.0 3D Printer and it has worked great! I will buy more colors soon.
Curtis Ota (verified owner) –
I took 1 extra week to my filament because I had left a note that the parcel should be left at the post office… Boots Industries said they didn’t see the note to that effect. The filament is good, but they should read my order notes next time.
Lucas G (verified owner) –
Prints great! Using in my Dremel Ideamaker. Twice the filament for less than cost of one Ideamaker roll. You do need to set the temperature to about 225. Dremel says you warranty is void if you do not use Dremel filament. Mine is already out of warranty!
Arron Nicholson (verified owner) –
I was really happy with this product for the longest time, but after a few months it seems to have hardened quite a bit and has become breakable.
Darrel Wolery (verified owner) –
As expected…runs smoothly.
Liza Blackburn (verified owner) –
This stuff is epic. It prints consistently well, does not degrade quickly like some cheaper filaments do, and is still very affordable.
Eddie Shorey (verified owner) –
This is my go-to filament, since it’s priced fairly and yields very good results. I regularly print at 0.1mm layer high and get very good detail on my models.
Frank Rubenstein (verified owner) –
Great product for my flashforge 3D printer. Wish they made larger spools…
Jerold Stalder (verified owner) –
Good quality filament. Have used a lot of filament and this has been a very good quality one. Bought the 1.75 and with digital caliper was getting readings from 1.72-1.75 (well within the advertised accuracy) when intermittently testing different areas of the roll. Have purchased three different colors of the same brand, type and size and all have been about the same dimensionally.
Gerry Karlin (verified owner) –
After a long time of printing I’m finally running out of my first roll of natural PLA. This stuff if fantastic! It prints nice and smoothly every time. The natural PLA is great for painting. When I started running low on my first roll I came back to reorder but saw they were out of stock. I sent a quick message to Jean and he found me some unlisted inventory to get me back on track. They ship really fast too usually 2 days and I have my order.
Dario Coughlan (verified owner) –
So far the results have been consistent from one roll to the next.
Very happy with the product and will continue to buy boots industries filaments.
Ty Troop (verified owner) –
Great quality as with every other BI product I’ve ever ordered – I print a 1-2 kg per week, almost always from BI these days. The plastic was smooth, consistent, and resulted in great prints. Color was very even throughout. I run my printer at 228/50 when I use this PLA and have yet to experience any clogging at all, even though I’m working through a lot of product at a higher than normal speed. I’d definitely recommend it for anyone who is looking for solid quality PLA plastic.
Odis Orta (verified owner) –
Sticking not happening… It’s a pain to get it to work with ABS in dual extrusion. I couldn’t get it to stick to the bed so I started with an ABS raft but still couldn’t get the supports to stick.
Jay K (verified owner) –
This PLA prints beautifully at 220c with a 70c heat bed!
Shenna Matos (verified owner) –
very pleased with this product i’ve used 2 whole rolls and not a single jam either on my original china hot end or my e3d v6 – definitely beats the cheap stuff.
Nancee Polinsky (verified owner) –
I’ve had nothing but good experiences with this filament so far. I keep trying other brands in order to diversify my sources, but I keep regretting it. I always end up thinking.. “I should have got Boots Industries”…