SP Series 1.75 PLA – SILVER

$23.89 $19.89(USD)

  • CAD: $26.03

4.50 out of 5

Out of stock

SKU: F7GP1SLV Categories: , Tags: , , , , ,

Super Premium (SP) Series

Our advanced PLA formulation is developed specifically to enhance your 3D printing experience.

Parts made with Super Premium Series filament have excellent 3D printing characteristics such as:

  • Precise details
  • Excellent adhesion to build plates
  • Less curling or warping, and low odour

Eco-Friendly

Our PLA is derived from renewable plant sugars. Using this advanced process, carbon in the atmosphere contributing to global warming is transformed into sustainable and biodegradable 3D printing material.

This approach significantly reduces greenhouse gases when compared to oil-based plastics.

Spool Dimensions

Our spools are designed to fit many 3D printers including Makerbot® Replicator 2. They can also be used in standalone mode with a spool holder designed for that purpose.

Spool dimensions

Dimensions 9.0 x 9.0 x 1.6 in
Color

Silver

Filament Diameter

1.75 mm

PLA Resin

NatureWorks Ingeo 3D850

Print Temperature

190-230 °C

Quantity

750 g

6 reviews for SP Series 1.75 PLA – SILVER


  1. 5 out of 5

    (verified owner):

    I needed a silver color PLA and this one was perfect. The color is very full and vivid. Prints like a charm!

  2. 5 out of 5

    (verified owner):

    happy with it. thanks!

  3. 3 out of 5

    (verified owner):

    Not as good as the other colors. No matter what I do, this stuff delaminates (After printing). Parts are weak compared to similar settings with other colors from the same company. I now only use this color for small decorative pieces or throw-away prototypes.

  4. 5 out of 5

    (verified owner):

    I’ve been very happy with this stuff. It prints very consistently and precisely. I’m using it in my Micro 3D, and I had previously used the manufacturer’s PLA there. By comparison, M3D’s branded PLA is gummier and less brittle. M3D’s bridges better and makes stronger pieces, but it’s very hard to clean up backlash artifacts and such with a knife or sandpaper. This stuff is easy to clean up, which is really nice. I can even sand it somewhat. I’m still trying to get the ideal temperature dialed in, but I really like the material.

  5. 4 out of 5

    (verified owner):

    Super high quality. I’ve gone through probably 75% of the spool, with less trouble than I had with half as much of the OEM provided filament.

    Can’t recommend it highly enough; the only (minor) downside is that the center hole is on the small side so it may not fit all the spool holders out there.

  6. 5 out of 5

    (verified owner):

    This is a good filament. It prints smoothly and consistently. It is pure while and has a good flow. I’ve printed several large prints with no lifting. They were 120mmx190mmx4mm. No lifting as long as I had good glue coverage and kept the print within the heated area of the bed. I had one print that accidentally went outside the heated and glued area of my print bed. Overall very good!

Only logged in customers who have purchased this product may leave a review.